Marble Sort Level 489 — Walkthrough and Solution

Level 489 is the 9-count panel and connected box trap. The central Panel's nine-count demand hides a dense color dump that can flood the belt unless you clear the bottom boxes in the correct order.

Level489
DifficultyHard
Priority routeYellow → Blue
Watch forYellow

▶ Video walkthrough of Marble Sort level 489, then the step-by-step below.

⚡ Quick clear

Yellow → Blue. Only drop a colour when its box is ready.

Marble Sort Level 489 presents a board where a central Panel requires nine separate box clears before it opens. The key to success is to focus exclusively on the bottom row's initial demands—Yellow, Green, Dark Blue, and Light Pink—while avoiding the Purple box in the middle, which has no matching target yet. Once the Panel breaks, you must quickly adapt to the new colors and the Connected Boxes that appear, ensuring the Conveyor Belt never gets clogged.

The board opens with a Top Tray that has a central Panel flanked by two Tunnels, each marked with a three. In front of the Panel, a row of five boxes sits: Dark Blue on the far left, Light Pink next, Purple in the center, Yellow to its right, and another Dark Blue on the far right. The left wing of the tray holds a Red, a Yellow, an Orange, and a Green. The right wing holds a Purple, a Light Blue, a Green, and a Light Pink. The bottom area initially shows four boxes: Yellow, Green, Dark Blue, and Light Pink, from left to right.

Marble Sort Level 489 Walkthrough

The bottom row's front line dictates the opening sequence: you must clear Yellow, Green, Dark Blue, and Light Pink in that order, as they are the only colors with available target boxes. The Purple box in the center front row is a trap because there is no Purple bottom box ready, so tapping it would send marbles to the belt without purpose, risking a jam.

How to Beat Marble Sort Level 489 — Step-by-Step

Phase one: Breaking the Front Line

  1. Tap the Yellow box on the left side of the Top Tray, then the Yellow box from the front-right of the center block; this clears the first bottom box.
  2. Next, route the two Dark Blues: one from the far left of the center front row, and the other from the far right.
  3. Feed the Light Pink bottom box by pulling the Light Pink from the front-left of the center group, then combine it with the Light Pink on the top-right edge.
  4. Clear the Green bottom box by sending the Green from the lower left wing and the Green from the upper right wing.
  5. Ignore the Purple in the center front row; do not tap it.
  6. Continue matching the newly exposed front row boxes until you have cleared nine boxes total.

Phase two: Surviving the Panel Reveal and Connected Boxes

  1. When the Panel breaks, you see a new grid with Dark Blue on the left, Green in the middle, and Red on the right.
  2. Prioritize the left Connected Box pair: a Red/Brown box linked to a Light Blue box.
  3. Start delivering Red marbles from the new center grid to the Red bottom box.
  4. As the side Tunnels open, they release Light Blue and Dark Blue boxes; use the Light Blue to fill the second part of the left Connected pair.
  5. Keep the belt clear by only tapping colors that have an active target box; avoid unnecessary taps.

Phase three: Clearing the Final Connected Boxes

  1. Once the left Connected Boxes are gone, shift to the right side, which links a Light Pink box to a Dark Blue box.
  2. Pull the remaining Dark Blues from the left side of the exposed center grid, and pair them with any Dark Blues from the left Tunnel.
  3. Finish the right connection by scraping the remaining Light Pink boxes from the top right edge.
  4. After the Connected Boxes drop away, clean up the leftover Green boxes in the center and the stray Purple boxes from the start.
  5. Match your drops to the front row targets, and the board will clear itself.

Tips & tricks

  • Always check the bottom row before tapping any marble; if the color doesn't match a ready box, leave it alone.
  • Use the Conveyor Belt as a buffer, but don't let it fill up; aim to clear boxes as soon as you have pairs.
  • When the Panel breaks, focus on the Connected Boxes immediately, as they are the main source of new targets.

Common mistakes

  • Tapping the Purple box in the center front row at the start, which jams the belt with no target.
  • Neglecting the left Connected Box pair when they appear, causing a buildup of Red and Light Blue marbles.
  • Forgetting to clear the side Tunnels, which can release boxes that don't match any current target.

Marble Sort Level 489 FAQ

Why does my Conveyor Belt flood on Marble Sort Level 489?

The Conveyor Belt floods when you tap colors that have no active bottom box, such as the Purple in the center front row early on, or when the Panel breaks and you tap colors without ready targets.

Which color do I clear first on Marble Sort Level 489?

You should clear Yellow first, then Green, Dark Blue, and Light Pink in that order, as they are the initial bottom row demands.

How many moves does it take to clear Marble Sort Level 489?

The exact move count depends on your choices, but you need to clear at least nine boxes to break the Panel, plus additional moves for the Connected Boxes and cleanup, so it typically takes around 20-25 moves.

Do I need boosters to beat Marble Sort Level 489?

No, boosters are not required, but they can help if you struggle with the Conveyor Belt management during the Panel reveal.

What happens if I tap the Purple box early on Marble Sort Level 489?

If you tap the Purple box early, its marbles will sit on the Conveyor Belt with no target, clogging the belt and likely causing a jam, so you should avoid it until a Purple box appears later.

Get the Official Game

⬇ Download Marble Sort

Back to the full Marble Sort level list.