Marble Sort Level 364 presents a tricky layout where a tall stack of grey Hidden Boxes covers most of the upper area, leaving only a handful of exposed marbles at the bottom edge. The solution demands a strict order: first clear the exposed Light Blue to open a dig site, then pull Hidden Boxes one by one to find Red, and only after breaking the front row can you safely handle the Connected Boxes and the rest of the board.
The Top Tray resembles an upward-pointing arrow built from six rows of grey Hidden Boxes. At the very bottom of this grey mass, four colored boxes are visible: Light Pink on the far left, then Light Blue and Orange in the middle, and Purple on the far right. Directly above the Light Blue and Orange slots, two Yellow boxes are buried under the Hidden Boxes. The bottom area starts with a front row that asks for Light Blue on the left and Red on the right. Beneath that row, a set of Connected Boxes appears: on the left, a Pink box is attached to a Red box, and on the right, a Light Blue box is attached to another Light Blue. Below that linked row, a mixed group of Light Pink, Purple, Orange, and Dark Blue waits.
Marble Sort Level 364 Walkthrough
The front row of the bottom Boxes demands Light Blue on the left and Red on the right. The immediate problem is that the exposed Orange, Light Pink, and Purple in the Top Tray do not match any active receiver, so touching them would clog the Conveyor Belt with useless marbles.
The only safe start is to tap the exposed Light Blue, which clears the left front Box and opens a digging spot. From there, you must pull Hidden Boxes one at a time, hunting for Red to fill the right front Box. Any marble you uncover that you do not need should be left on the belt, but you must watch your belt space carefully.
How to Beat Marble Sort Level 364 — Step-by-Step
Phase one: Clearing the front row
- Tap the exposed Light Blue box in the Top Tray, sending those marbles into the left front bottom Box.
- Tap Hidden Boxes one by one, starting from the spot where the Light Blue was, and look for Red marbles.
- When you uncover Red, drop them into the right front bottom Box to clear that slot.
- Ignore the exposed Light Pink, Orange, and Purple boxes completely for now—they are decoys.
Phase two: Breaking the Connected Boxes
- Once the front row is clear, the Connected Boxes drop into play.
- Focus on clearing the chained Pink-Red pair on the left by using the starting Light Pink from the Top Tray.
- Clear the chained Light Blue-Light Blue pair on the right by using any Light Blue you uncover.
- After these chains break, the upper layers reveal White, Light Green, and more Red and Purple.
- Now you can drop the trapped Yellow boxes into the lower-left Yellow receiver to cycle the bottom row.
Phase three: Final cleanup
- Match the White and Orange boxes that appear in the middle of the Top Tray to clear the central block.
- Route the Light Green boxes from the upper corners down to the Light Green receiver that cycles in.
- Use remaining belt space to hold Dark Blue and Brown marbles while you flush out the last Purple and Red.
- Deliver the final Purple marbles to their slot to finish the level.
Tips & tricks
- Always check the Conveyor Belt before tapping a Hidden Box; if it is full, wait for the bottom row to cycle.
- Keep the exposed Orange, Light Pink, and Purple untouched until you have the matching receiver.
- When the bottom row cycles, prioritize receivers that match the colors you have accumulated on the belt.
Common mistakes
- Dropping the exposed Orange or Purple early fills the belt with dead weight and stalls progress.
- Digging too fast without checking the belt can cause a jam that forces a restart.
- Forgetting to use the starting Light Pink for the Pink-Red chain will leave you stuck later.
Marble Sort Level 364 FAQ
Why does my Conveyor Belt flood on Marble Sort Level 364?
The belt floods because you tap the exposed Orange, Light Pink, or Purple too early, and those colors have no matching receiver until later, so they pile up and block new pulls.
Which color do I clear first on Marble Sort Level 364?
Clear the exposed Light Blue first, as it matches the left front Box and opens a digging path to find Red for the right front Box.
How many moves does it take to clear Marble Sort Level 364?
There is no fixed move count, but a typical clear takes around 80 to 100 taps, depending on how efficiently you manage the belt and avoid unnecessary moves.
Do I need boosters to beat Marble Sort Level 364?
No, boosters are not required if you follow the correct order and manage the Conveyor Belt carefully, but they can help if you get stuck.
What happens if I tap the exposed Orange early on Marble Sort Level 364?
If you tap the exposed Orange early, it will sit on the Conveyor Belt with no destination, filling valuable space and making it harder to dig for the Red you need, often leading to a jam.
Get the Official Game
Back to the full Marble Sort level list.