Marble Sort Level 130 — Walkthrough and Solution

Marble Sort Level 130 presents a board where four large wooden crates occupy the central area, leaving only a narrow bottom row and small vertical gaps for play. The outer edges are lined with grey Mystery Boxes that hide the later colors. To succeed, you must focus on the visible marbles first, avoiding the hidden blocks until the center is cleared.

The Top Tray holds a single row of seven marbles at the bottom, with additional marbles squeezed into the gaps between the crates. From left to right, the bottom row contains Red, Yellow, Dark Green, Purple, Blue, Brown, and Purple. The left and right sides have stacks that block access to the outer columns. The starting Boxes at the bottom are Lime Green on the far left, Blue in column two, Yellow in column three, and Pinkish-Red on the far right. The key challenge is that the required Lime Green and Pinkish-Red marbles are buried behind Red and Brown marbles, forcing you to temporarily park those blockers on the Conveyor Belt.

Marble Sort Level 130 Walkthrough

Your initial targets are Lime Green, Blue, Yellow, and Pinkish-Red, positioned from left to right. However, the visible Lime Green marble sits above a Red marble on the left side, and the Pinkish-Red marble is above a Brown marble in the center gap. This means you must first clear the Yellow and Blue Boxes to reveal new receivers, then use the Conveyor Belt to manage the Red and Brown blockers.

The main trap is that the Conveyor Belt can quickly fill if you try to access the hidden colors prematurely. The bottom row acts as a barrier, and the Mystery Boxes on the perimeter are decoys until you have space to sort them. Patience and methodical clearing are essential.

How to Beat Marble Sort Level 130 — Step-by-Step

Phase one: Clear the center bottom row

1. Tap the Yellow marble in the bottom row to fill the Yellow Box in column three.
2. Tap the Blue marble in the bottom row to fill the Blue Box in column two.
3. After clearing those, new Boxes appear: Pink in column two and Brown in column three.
4. Tap the Brown marble from the bottom row to fill the newly revealed Brown Box.
5. Tap the Pink marble located in the vertical gap between the crates to fill the Pink Box.

Phase two: Open the side gaps

1. Tap the Red marble on the bottom left of the Top Tray to move it to the Conveyor Belt.
2. Now tap the Lime Green marble above it to fill the far left Box.
3. On the right side, tap the Red marble stuck in the gap between the crates to move it to the Conveyor Belt.
4. Tap the Pink marble above it to fill the far right Box.
5. After these clears, new Boxes appear: another Lime Green in column one and a Purple in column four.
6. Tap the two Purple marbles from the bottom row to fill the Purple Box.

Phase three: Tackle the Mystery Boxes

1. Examine your current active Boxes; they are likely Red, Brown, Blue, and Lime Green.
2. The Red marble on the Conveyor Belt will slide into the Red Box automatically.
3. Tap the lowest Mystery Box on the left edge once to reveal its color.
4. If the revealed color matches an active Box, tap it again to clear it.
5. If it does not match, leave it in the Top Tray and do not drop it unless necessary.
6. Repeat this process for the right edge, opening one Mystery Box at a time and sorting each color before moving to the next.

Tips & tricks

• Always keep the Conveyor Belt less than half full to avoid overflow.
• Open Mystery Boxes one by one, sorting each color immediately.
• Do not tap a Mystery Box twice in a row unless you know the color is safe.

Common mistakes

• Panic-tapping Mystery Boxes without checking the active Boxes.
• Dropping non-matching colors onto the Conveyor Belt, causing it to fill up.
• Ignoring the bottom row and trying to access the sides first.

Marble Sort Level 130 FAQ

Get the Official Game

⬇ Download Marble Sort

Back to the full Marble Sort level list.